VEGA WHA-GW-WIRELESSHART GATEWAY - Manual (Page 79)

WHA-GW-*
Operation
22
1981
2011
-0
7
79
The Instrument List backup is stored to your hard drive.
5. To import a file from your hard drive, press Import Table from File.
6. Choose an Instrument List backup file from your hard drive.
The Instrument List backup file is imported.
7. To store the imported Instrument List backup to the Gateway, press Store to device.
8. To activate the Instrument List backup in the Gateway, choose Additional Functions >
Reset > Activate Instrument List backup.
The Instrument List backup in the Gateway is activated and becomes the new
Instrument List.
6.3.6 About
Additional Functions > About displays information about the DTM software and the
device.
6.3.7 Change Password
Figure 6.13Change Password function
The connection to the Gateway's web interface is made using a secure connection
(HTTPS) which requires a user name and a password. The factory default settings are:
User name: admin
Password: admin
You can change both user name and password in the web interface.
Changing user name and password for the web interface
1. In the web interface (see chapter 5.1), choose Additional Functions > Change Pass-
word.
2. Type in your new password twice.
3. To apply your changes and use your new password, press Change Password.
4. To discard the operation and to keep your old password, press Discard Operation.
Note!
The function Change Password is available only in the Gateway's web interface and not in
the DTM.