Rainbow Electronics FARGO MAESTRO 100 (with TCP_IP) - Manual (Page 115)

Global Configuration Commands
Select Type of Address +CSTA
©Restricted Page: 109 / 184
This document is the sole and exclusive property of Wavecom. Not to be distributed or divulged without
prior written agreement.
WM_DEV_OAT_UGD_049 - 001 VOLUME 1 August 23, 2007
6.21 Select Type of Address +CSTA
6.21.1 Description
This command selects the type of number for further dialing commands (D) according
to GSM specifications.
6.21.2 Syntax
Action command
AT+CSTA=<type>
OK
Read command
AT+CSTA?
+CSTA: <type>
OK
Test command
AT+CSTA=?
+CSTA: (list of supported <type>s)
OK
6.21.3 Parameters and Defined Values
< type>:
type of address octet in integer format (refer to GSM 04.08
subclause 10.5.4.7)
145 international number
129 national number (default value)
6.21.4 Parameter Storage
The <type> parameter is stored in EEPROM using the AT&W command. The default
value can be restored using AT&F.