Rainbow Electronics FARGO MAESTRO 100 (with TCP_IP) User Manual
Page 122
Wireless CPU
®
Status Commands
General Indications +WIND
©Restricted
Page:
116 / 184
This document is the sole and exclusive property of Wavecom. Not to be distributed or divulged without
prior written agreement.
WM_DEV_OAT_UGD_049 - 001
VOLUME 1
August 23, 2007
<event>:
event identifier
0
the SIM presence pin has detected a "SIM removed"
1
the SIM presence pin has detected a "SIM inserted"
2
the calling party is alerting
3
the product is ready to process AT commands (except
phonebooks, AOC, SMS), at init or after AT+CFUN=1
4
the product is ready to process all AT commands, end of
phonebook init or swap (FDN to ADN)
5
a call <idx> has been created (after ATD or +CCWA…)
6
a call <idx> has been released, after a NO CARRIER, a
+CSSU: 5 indication, or after the release of a call waiting
7
the network service is available for an emergency call
8
the network is lost
9
the audio channel is opened
10
reload status of each SIM phonebook after init phase (after
power on or SIM insertion)
11
checksum of SIM phonebooks after initialization
12
an interruption has occurred (only if INTERRUPT feature is
activated)
13
the rack has been detected as closed
14
the rack has been detected as opened
15
the Wireless CPU
®
has received a NITZ information message
from the network
16
SMS and SMS CB services are initialized