Rainbow Electronics FARGO MAESTRO 100 (with TCP_IP) - Manual (Page 244)

Call Control Commands
Automatic Answer S0
©Restricted
Page: 54 / 156
This document is the sole and exclusive property of Wavecom. Not to be distributed or divulged without
prior written agreement.
WM_DEV_OAT_UGD_049 - 001 VOLUME 2 August 23, 2007
12.11 Automatic Answer S0
12.11.1 Description
This command determines and controls the product automatic answering mode.
12.11.2 Syntax
Action command
ATS0=<value>
OK
Read command
ATS0?
<value>
OK
Test command
None
12.11.3 Parameters and Defined Values
<value>:
number of rings before automatic answer (3 characters padded
with zeros)
Values range is 0 to 255 (default value: 000).
12.11.4 Parameter Storage
The <value> parameter is stored in EEPROM using AT&W command. The default
value can be restored using AT&F.