Rainbow Electronics FARGO MAESTRO 100 (with TCP_IP) - Manual (Page 144)

Serial Port Commands
DTE-DCE Character Framing +ICF
©Restricted Page: 138 / 184
This document is the sole and exclusive property of Wavecom. Not to be distributed or divulged without
prior written agreement.
WM_DEV_OAT_UGD_049 - 001 VOLUME 1 August 23, 2007
8.3 DTE-DCE Character Framing +ICF
8.3.1 Description
This command is used to determine the local serial port start-stop (asynchronous)
character framing used by the DCE.
8.3.2 Syntax
Action command
AT+ICF=<format>[,<parity>]
OK
Read command
AT+ICF?
+ICF: <format>,<parity>
OK
Test command
AT+ICF=?
+ICF: (list of supported <format>s),(list of supported <parity>s)
OK