Rainbow Electronics FARGO MAESTRO 100 (with TCP_IP) - Manual (Page 27)

Identifications commands
Request Model Identification +CGMM
©Restricted Page: 21 / 184
This document is the sole and exclusive property of Wavecom. Not to be distributed or divulged without
prior written agreement.
WM_DEV_OAT_UGD_049 - 001 VOLUME 1 August 23, 2007
4.2 Request Model Identification +CGMM
4.2.1 Description
This command is used to get the frequency bands supported. With multi-band
products the response may be a combination of different bands.
4.2.2 Syntax
Action command
AT+CGMM
<model>
OK
Read command
None
Test command
None
4.2.3 Parameters and Defined Values
<model>: frequency bands selected
G850 GSM 850
900E GSM 900 Extended
1800 DCS 1800
1900 PCS
MULTIBAND
900E 1800
multi-band: GSM 900 extended band and DCS 1800
MULTIBAND
G850 1900
multi-band: GSM 850 and PCS
4.2.4 Parameter Storage
None.