Using remote console – SENA STS Series User Manual
Page 19
19
2.2.6. Using Remote Console
The IP address of the STS Series must be known before users can access the STS Series using the
Remote console (see chapter 3. Network Configuration for details). The default IP address of STS
Series is 192.168.161.5.
The Remote console access function can be disabled in the remote host access option (3.5 IP
Filtering for details).
The following instructions will assist in setting up the Remote Console functionality:
1)
Run either a Telnet program or a program that supports Telnet functions (i.e. TeraTerm-Pro
or HyperTerminal). The target IP address and the port number must match the STS Series. If
required, specify the port number as 23.
Type the following command in the command line interface of user’s computer.
telnet 192.168.161.5
Or run a Telnet program with the following parameters:
Figure 2-9 Telnet program set up example (TeraTerm Pro)
2)
The user must log into the STS Series. Type the user name and password. A factory default
setting of the user name and password are both root for the system root and admin for the
system administrator.
3)
Upon authentication by the STS Series, the CLI prompts or text menu screens are shown.