All port configurations – SENA STS Series User Manual
Page 67
67
4.3. All Port Configurations
If modifications are being made to all serial ports are similar or the same, changes can be made to the
serial port configuration for all serial ports simultaneously. With the all port configuration function, the
configuration will be applied to all the serial ports; unless an individual port’s “apply all port setting”
option is disabled.
“All port configuration” parameters can be grouped into the following groups:
1.
Port enable/disable
2.
Port title
3.
Host mode
4.
Remote host configuration
5.
Port IP filtering
6.
Cryptography configuration (Only valid and visible if host mode set to TCP or Modem
Emulation mode)
7.
Filter application
8.
Serial port parameters
9.
Modem configuration (Only valid and visible if host mode set to TCP mode)
10. Port logging
11. Port event handling
Figure 4-19 All port configuration