Mib-ii system objects configuration – SENA STS Series User Manual
Page 26
Advertising
26
Figure 3-2 SNMP Configuration
3.2.1. MIB-II System Objects Configuration
MIB–II System objects configuration sets the System Contact, Name, Location, and Authentication-
failure traps used by the SNMP agent of the STS Series. These settings provide the values used for
the MIB-II sysName, sysContact, sysLocation, sysService and enableAuthenTrap.
Brief descriptions of each object are as follows,
sysContact:
Identification of the contact person for the managed system (STS Series), and a description of how to
contact the person.
sysName:
Name used to identify the system. By convention, this is the fully qualified domain name of the node.
sysLocation:
The physical location of the system (e.g., Room 384, Operations Lab, etc.).
Advertising