SENA STS Series - Manual (Page 40)

40
4.2.1. Port Enable/Disable
Each serial port can be enabled or disabled. If a serial port is disabled, users cannot access the serial
port. Figure 4-2 shows the serial port enable/disable screen.
Figure 4-2 Serial port enable/disable
By clicking on the [Reset] button, users can reset a stuck or deadlocked serial port. Click on the [Set]
button to set the port as factory default.
4.2.2. Port Title
Users can enter descriptive information for each port based on the device attached to it. This can
include the device type, vendor, and/or location. The port title is helpful in the configuration process,