SENA STS Series - Manual (Page 28)

28
Figure 3-3 Browsing MIB-II OIDs of STS Series SNMP agent using SNMP Browser
(AdventNet MibBrowser)
3.3. Dynamic DNS Configuration
When users connect the STS Series to a DSL line or use a DHCP configuration, the IP address might
be changed whenever it reconnects to the network. It can therefore be very difficult to post all related
contacts for each new IP address. In addition, if the administrator only has access through the remote
console, there is no way to know if an IP address has changed, or what the new IP address is.
A Dynamic DNS service is provided by various ISPs or organizations to deal with the above issue. By
using the Dynamic DNS service, users can access the STS Series through the hostname registered in
the Dynamic DNS Server regardless of any IP address change.
By default, the STS Series only supports Dynamic DNS service offered at Dynamic DNS Network
Services, LLC ( www.dyndns.org ). Contact Sena technical support for issues regarding other Dynamic
DNS service providers.
To use the Dynamic DNS service provided by Dynamic DNS Network Services, the user must set up
an account in their Members' NIC (Network Information Center - http://members.dyndns.org ). The user