SENA STS Series - Manual (Page 74)

74
6. System Administration
The STS Series display the system status and the log data via a Status Display Screen. This screen is
to be used for management purposes. System status data includes the model name, serial number,
firmware version and the network configuration of the STS Series. The STS Series can also be
configured to deliver log data automatically via email to a specified recipient with the system-logging
feature.
The users can configure the STS Series’s device name, date and time settings, and reload factory
default settings in this menu group. The users can also upgrade the firmware of the STS Series using
the web interface, remote consoles or serial console.
6.1. System Status
Figure 6-1 System status display
6.2. System Logging
The STS Series provides both the system logging feature and the system log status display. The user
may configure the STS Series to enable or disable the system logging process, the system log buffer
size, as well as select the log storage location.
 System log storage location
The system log can be stored in the STS Series internal memory, the ATA/IDE fixed disk card
inserted in PCMCIA slot, the mounting point on an NFS server or the SYSLOG server. If the