GE Industrial Solutions EntelliGuard E Circuit Breaker User Manual
Page 15
Advertising
©2012 General Electric All Rights Reserved
15
SECONDARY DISCONNECT BLOCKS
Located for wiring to the accessories :
-
Top-mounted for all envelopes.
By removing one screw, the cassette-mounted
secondary disconnect block can be tilted in the
mounted state and can be removed for easy control
circuit wiring (Fig. 3.18).
Figure 3.18. Secondary Disconnect
Block-A contains a set of 39 self-aligning secondary
circuit isolating contacts. Each contact is clearly
labeled with the connection point.
Block-B used for internal wiring in the cassette.
Advertising