GE Industrial Solutions EntelliGuard E Circuit Breaker - Manual (Page 2)

2 ©2012 General Electric All Rights Reserved
HAZARD CATEGORIES
The following important highlighted information appears
throughout this document to warn of potential hazards or
to call attention to information that clarifies a procedure.
Carefully read all instructions and become familiar with
the devices before trying to install, operate, service or
maintain this equipment.
DANGER
Indicates a hazardous situation which, if not avoided, will
result in death or serious injury.
WARNING
Indicates a hazardous situation which, if not avoided,
could result in death or serious injury.
CAUTION
Failure to comply with these instructions may result in
product damage.
NOTICE
Indicates important information that must be
remembered and aids in job performance
TRADEMARKS
EntelliGuard™ E
EntelliGuard Messenger™
EntelliGuard™ TU
Entellisys™
WARRANTY
This document is based on information available at the
time of its publication. While efforts have been made to
ensure accuracy, the information contained herein does
not cover all details or variations in hardware and
software, nor does it provide for every possible
contingency in connection with installation, operation,
and maintenance. Features may be described herein that
are not present in all hardware and software systems. GE
Industrial Solutions assumes no obligation of notice to
holders of this document with respect to changes
subsequently made. GE Industrial Solutions makes no
representation or warranty, expressed, implied, or
statutory, with respect to, and assumes no responsibility
for the accuracy, completeness, sufficiency, or usefulness
of the information contained herein. No warrantees of
merchantability or fitness for purpose shall apply.
Contact your local sales office if further information is
required concerning any aspect of EntelliGuard E circuit
breaker operation or maintenance.