Accessory installation, Power break® ii switches, Chapter 1. introduction – GE Industrial Solutions Power Break II Switches, 800-4000A Frames, 240-600Vac User Manual
Page 10
Power Break® II Switches
Chapter 1. Introduction
Figure 1. Locations of the front-panel escutcheon cutout and
mounting holes, 800–2000 A frames.
Accessory Installation
The following accessories may be installed in the switch.
Refer to Chapter 3 of this publication for catalog numbers
and to the instruction sheet supplied with each accessory
for installation instructions.
• Lugs and Adapters
• Motor Operator Mechanism
• Remote
Close
• Undervoltage
Release
• Shunt
Trip
• Shunt Trip with Lockout
• Bell Alarm–Alarm Only
• Bell Alarm with Lockout
• Auxiliary Switch Module
• Mechanical
Counter
• Key Interlock Mounting Provision
• Push
Button
Cover
• Door
Interlock
• Mechanical
Interlock
Figure 2. Locations of the front-panel escutcheon cutout and
mounting plate, 2500–4000 A frames.
2