GE Industrial Solutions EntelliGuard R AKD-6 - Manual (Page 14)

13 EntelliGuard R Circuit Breaker Retrofill AKD-6 Installation Manual DEH-41548 02/12
Figure 7. Bus, Interior View
Unpack Retrofill Circuit Breaker
By following the procedures below, you should be able to install the breaker with minimum effort and time.
• Turn off all power to switchgear. Tagout
and lockout main source, up-stream or main
breaker.
• Failure to comply with these instructions will
result in death or serious injury from severe burns
caused by arc flashing that has exceedingly high
temperatures.
•
Always wear personal protection equipment
according to OSHA standards and appropriate
to the severity of potential burns.
• Ensure only qualified personnel install, operate, service, and maintain all electrical
equipment.