Falling object – GE Industrial Solutions EntelliGuard R AKD-6 User Manual
Page 15
14
EntelliGuard R Circuit Breaker Retrofill AKD-6 Installation Manual DEH-41548 02/12
Falling Object
• Do not walk or remain under any heavy assembly while
hoisted above head as the chains securing the assembly may
give way
• Ensure lifting equipment has capability for device being lifted.
• Wear hard hat, gloves, and safety shoes.
• Failure to comply with these instructions could result in serious injury.
PRODUCT DAMAGE
• Ensure circuit breaker and its accessories are
always used within their designated ratings.
• Do not allow the circuit breaker to hit a hard
surface while handling.
•
Do not drag or slide the circuit breaker across a
hard or rough surface
• A factory-installed rejection feature prevents mismatching circuit breakers and cassettes/substructure,
preventing the insertion of a circuit breaker with a lower rating into a higher rated cassette/substructure,
or the insertion of a higher rated circuit breaker into a lower rated cassette/substructure.
Quality
All EntelliGuard R circuit breakers have been designed and manufactured to ANSI standards. The design was based
on the original requirements from the legacy switchgear and breaker. The product is manufactured in the same
factory as the AK and AKR; and is inspected using the same master gauges used on the legacy AK, AKR breakers to
confirm electrical and mechanical performance, including rejections-features.
Information Label
On the side wall of each circuit breaker there is a detailed factory-assembled, side label that details all features
included on both the circuit breaker and on the trip unit.
Product and Catalog Serial Numbers
Product and catalog serial numbers should be kept handy when communicating about the circuit breaker. Each
circuit breaker has a unique serial number located on the left side (viewed from front) of the front fascia.