GE Industrial Solutions CAR2912TE series - Manual (Page 6)

GE
Preliminary Data Sheet
CAR2912TE series front-end
Input: 90Vac to 264Vac; Output: 12Vdc @ 2900W; 3.3 or 5Vdc @ 4A Standby
October 21, 2013 ©2013 General Electric Company. All rights reserved. Page 6
Environmental Specifications
Parameter Min Typ Max Units Notes
Ambient Temperature -10 6 70 °C Derated above 50°C
Storage Temperature -40 85 °C
Operating Altitude 2250/7382 m/ft
Non-operating Altitude 8200/30k m / ft
Power Derating with Temperature 2.5 %/°C 50°C to 70°C
Power Derating with Altitude 2.0 °C/301 m
°C/1000 ft
Above 1524 m/5000 ft
Acoustic noise 55
45
dbA
Full load
Half load
Over Temperature Protection 125/110 °C Shutdown / restart
Humidity
Operating
Storage
30
10 95
95 % Relative humidity, non-condensing
Shock and Vibration acceleration 2.4 Grms Meet IPC-9592B Class II
EMC Compliance
Parameter Criteria Standard Level Test
AC input
Conducted emissions EN55022, FCC Docket 20780 part 15, subpart J
EN61000-3-2 A* 0.15 – 30MHz
0 – 2 KHz
Radiated emissions** EN55022 A* 30 – 10000MHz
AC input
immunity
Voltage dips EN61000-4-11 B -30%, 10ms
B -60%, 100ms
B -100%, 5sec
Voltage surge EN61000-4-5 A 4kV, 1.2/50µs, common mode
A 2kV, 1.2/50µs, differential mode
Fast transients EN61000-4-4 B 5/50ns, 2kV (common mode)
Enclosure
immunity
Conducted RF fields EN61000-4-6 A 130dBµV, 0.15-80MHz, 80% AM
Radiated RF fields EN61000-4-3 A 10V/m, 80-1000MHz, 80% AM
ENV 50140 A
ESD EN61000-4-2 B 4kV contact, 8kV air
* Note: Contact the factory for a recommended external EMI filter to meet Class B emissions
** Radiated emissions compliance is contingent upon the final system configuration.
6 Designed to start at an ambient down to -40°C; meet spec after ≅ 30 min warm up period, may not meet operational limits below -10°C.