GE Industrial Solutions Digital Energy GT Series UPS 5_6_8_10 kVA - Manual (Page 32)

5 COMMUNICATION
5.1 DB9 COMMUNICATION PORT
The RS232 port is a plug-in interface port, which enables advanced communication between the UPS
and the computer via serial cable (fig. 5.1) and UPS monitoring software. The interface port is already
operative in stand-by mode (see section 4.4.9).
To change settings of the unit, we strongly recommend to be sure that the unit is in stand-by mode.
Some settings can only be changed if the UPS operates in bypass or stand-by mode.
NOTE
The change of some settings can cause the unit to switch from bypass to
standby and output power is lost.
For more information regarding possible settings, please refer to the “Help” manual of the UPS
monitoring software.
8/10 kVA
5/6 kVA
fig. 5.1
5.2 SNMP INTERFACE CARD (OPTION)
This card allows the data interface to be connected directly to an Ethernet network. The card is fitted into
the SNMP Card slot (8, fig. 3.3.5.a). For more information, please refer to the user manual that comes with
the interface card.
modifications reserved 32 User manual GT Series 5/6/8/10 kVA UPS 1.0 (US)