GE Industrial Solutions Digital Energy GT Series UPS 5_6_8_10 kVA - Manual (Page 4)

1 IMPORTANT SAFETY INSTRUCTIONS
1.1 SAVE THESE INSTRUCTIONS
This manual contains important instructions that should be followed during installation and maintenance of the UPS.
It also gives all necessary information about the correct use of the UPS. Before attempting to install and start up the
UPS, carefully read this manual. Keep this manual next to the unit for future references.
Full understanding of and compliance with the safety instructions and warnings contained in this
manual are the
ONLY CONDITIONS
to avoid any dangerous situation during installation, operation and maintenance work, and to
preserve the maximum reliability of the UPS system.
GE refuses any responsibility in case of non-observance, unauthorized alterations or improper use of
the delivered UPS.
While every care has been taken to ensure the completeness and accuracy of this manual, GE accepts
no responsibility or liability for any loss or damage resulting from the use of the information contained
in this document.
This document shall not be copied nor reproduced without the permission of GE.
Due to technical improvements, some of the information contained in this manual may be changed
without notice.
The instructions in this manual are for UPS models GT5000 RT, GT6000 RT, GT8000 RT and GT10000 RT. Check your
model number by looking at the top cover of your UPS. Any difference in instructions is clearly indicated in the text
(for instance ‘GT10000 RT’).
1.2 SAFETY WARNINGS AND SYMBOLS
Safety warnings
The text of this manual contains warnings to avoid risk to persons and to avoid damages to the UPS system and the
supplied critical loads. Do not proceed beyond these warnings if you do not fully understand and/or are not able to
meet the mentioned conditions. The non-observance of the warnings reminding hazardous situations could result in
human injury and equipment damage.
Please pay attention to the meaning of the following warnings and symbols.
WARNING!
Refers to procedures or operations which, when not correctly performed, could
cause personal injury or serious damage to the system.
NOTE
Warns the user about important operations or procedures described in this
manual.
Safety Symbols
CAUTION
The product may be in danger: when procedures or operations are not correctly
performed, damage to the product may be the result.
DANGER OF ELECTRICALLY LIVE PARTS
Related to all situations with potentially hazardous voltage.
modifications reserved 4 User manual GT Series 5/6/8/10 kVA UPS 1.0 (US)