GE Industrial Solutions SG Series 50 & 80 kVA Operating Manual User Manual
Sg series, Ge digital energy power quality, Operating manual
Advertising
Table of contents
Document Outline
- IMPORTANT SAFETY INSTRUCTIONS
- INTRODUCTION
- DESCRIPTION
- LAYOUT
- 5 CONTROL PANEL
- LCD SCREEN
- 7 OPERATION
- 7.1 PROCEDURES FOR SINGLE UPS
- 7.2 PROCEDURES FOR UPS FUNCTIONING AS FREQUENCY CONVERTER
- 7.3 PROCEDURES FOR PARALLEL SYSTEM
- 7.3.1 Parallel System start-up
- 7.3.2 Maintenance system shutdown (Load supplied from Q2 on all Units)
- 7.3.3 From Manual Bypass (Q2) to normal function VFI
- 7.3.4 Separate a Unit from the parallel system (System Redundancy)
- 7.3.5 Reconnect a Unit to a parallel system
- 7.3.6 Parallel system shutdown (No Load supply)
- 7.3.7 Restore to normal operation after “total off”
- 7.3.8 Restore to normal operation after EPO (Emergency Power Off)
- 7.4 PROCEDURES FOR PARALLEL SYSTEM WITH COMMON BATTERY
- 7.4.1 Parallel System start-up
- 7.4.2 Maintenance system shutdown (Load supplied from Q2 on all Units)
- 7.4.3 From Manual Bypass (Q2) to normal function VFI
- 7.4.4 Separate a Unit from the parallel system (System Redundancy)
- 7.4.5 Reconnect a Unit to a parallel system
- 7.4.6 Parallel system shutdown (No Load supply)
- 7.4.7 Restore to normal operation after “total off”
- 7.4.8 Restore to normal operation after EPO (Emergency Power Off)
- OPTIONS
- MAINTENANCE
- 10 NOTES