GE Industrial Solutions AF-300 P11 - Manual (Page 44)

4-7
Data subject to change without notice 7/07. © 2007 GE Drives
4.3.6 Checking Function Data
Select 2. DATA CHECK on the Program Menu screen. The Function Select screen then appears with function codes and
names.
Select the desired function and press FUNC/DATA to check the function data. By pressing FUNC/DATA, the screen
switches to the Data Setting screen, where data can be modified.
4.3.7 Monitoring Operating Status
Select 3. OPR MNTR on the Program Menu screen to display the current inverter operating status. Use and
to switch between the four operation monitor screens.
60.00
RUN
PRG > PRG MENU
F/D > LED SHIFT
FWD
60.00 60.00
F00 0
F01 *1
F02 *1
F03 60 Hz
60.00
F00 DATA PRTC
0
0 - 1
Function code Data changed from initial value Data
RUN
PRG > PRG MENU
F/D > LED SHIFT
FWD
1.DATA SETTING
> 2.DATA CHECK
3. OPR MNTR
4.I/O CHECK
1.DATA SETTING
2.DATA CHECK
> 3. OPR MNTR
4.I/O CHECK
60.00 60.00 60.00
Fout=xxxx.xHz
Iout=x.xxA
Vout=xxxV
TRQ=xxx% Output frequency
Output current
Output voltage
Torque calculation method
60.00 60.00
SYN=xxxxxx
LOD=xxxxxx
LIN=xxxxxx
Synchronous rotation
speed (r/min)
Load speed (r/min)
Line speed (m/min)
Fref=xxxx.x Hz
xxx xx xx xx Setting frequency
Operation status
FWD/REV: Rotating direction
IL: Current limiting
VL: Voltage limiting
LU: Under voltage
TL: Torque limiting
60.00
SV=xxxxx
PV=xxxxx
TLD=xxx%
TLB=xxx% PID setting value
PID feedback value
Driving torque limiting setting
Braking torque limiting setting
PRG FUNC
DATA
FUNC
DATA
PRG
FUNC
DATA