Asus Pundit P2-PE2 - Manual (Page 62)

5 - 1 4 5 - 1 4 5 - 1 4 5 - 1 4 5 - 1 4 C h a p t e r 5 : B I O S s e t u p C h a p t e r 5 : B I O S s e t u p C h a p t e r 5 : B I O S s e t u p C h a p t e r 5 : B I O S s e t u p C h a p t e r 5 : B I O S s e t u p
SMART Monitoring [Disabled] SMART Monitoring [Disabled] SMART Monitoring [Disabled] SMART Monitoring [Disabled] SMART Monitoring [Disabled]
Allows you to enable or disable the S.M.A.R.T. (Self-Monitoring, Analysis
and Reporting Technology) system that utilizes internal hard disk drive
monitoring technology. This parameter is normally disabled because the
resources used in the SMART monitoring feature may decrease system
performance. Configuration options: [Disabled] [Enabled]
Manual HDD configuration Manual HDD configuration Manual HDD configuration Manual HDD configuration Manual HDD configuration
You can manually enter the number of cylinders, heads and sectors per
track for the drive when you set the Type item to [User Type HDD]. Refer
to the drive documentation or label for this information.
Other configuration options for the Type field include:
[ C D - R O M ] [ C D - R O M ] [ C D - R O M ] [ C D - R O M ] [ C D - R O M ] - for IDE CD-ROM drives
[ L S 1 2 0 ]
[ L S 1 2 0 ] [ L S 1 2 0 ] [ L S 1 2 0 ] [ L S 1 2 0 ] - for LS-120 compatible floppy disk drives
[ Z I P ]
[ Z I P ] [ Z I P ] [ Z I P ] [ Z I P ] - for ZIP-compatible disk drives
[ M O ]
[ M O ] [ M O ] [ M O ] [ M O ] - for IDE magneto-optical disk drives
[ O t h e r A T A P I D e v i c e ]
[ O t h e r A T A P I D e v i c e ] [ O t h e r A T A P I D e v i c e ] [ O t h e r A T A P I D e v i c e ] [ O t h e r A T A P I D e v i c e ] - for IDE devices not listed here
After making your selections on this sub-menu, press the <Esc> key to
return to the Main menu. When the Main menu appears, the hard disk drive
field displays the size for the hard disk drive that you configured.
Translation Method [LBA] Translation Method [LBA] Translation Method [LBA] Translation Method [LBA] Translation Method [LBA]
Sets the hard disk drive translation mode. When Logical Block Addressing
(LBA) is enabled, the 28-bit addressing of the hard drive is used without
regard for cylinders, heads, or sectors. Note that LBA Mode is necessary
for drives with more than 504 MB storage capacity. Configuration options:
[LBA] [LARGE] [Normal] [Match Partition Table] [Manual]