Asus Pundit P2-PE2 - Manual (Page 72)

5 - 2 4 5 - 2 4 5 - 2 4 5 - 2 4 5 - 2 4 C h a p t e r 5 : B I O S s e t u p C h a p t e r 5 : B I O S s e t u p C h a p t e r 5 : B I O S s e t u p C h a p t e r 5 : B I O S s e t u p C h a p t e r 5 : B I O S s e t u p
5.5.1 5.5.1 5.5.1 5.5.1 5.5.1 Power Up Control Power Up Control Power Up Control Power Up Control Power Up Control
AC Power Loss Restart [Disabled] AC Power Loss Restart [Disabled] AC Power Loss Restart [Disabled] AC Power Loss Restart [Disabled] AC Power Loss Restart [Disabled]
Allows you to set whether or not to reboot the system after power
interruptions. [Disabled] leaves your system off while [Enabled] reboots
the system. [Previous State] sets the system back to the state it was
before the power interruption. Configuration options: [Disabled] [Enabled]
[Previous State]
Power Up On PCI Device [Disabled] Power Up On PCI Device [Disabled] Power Up On PCI Device [Disabled] Power Up On PCI Device [Disabled] Power Up On PCI Device [Disabled]
When set to [Enabled], this parameter allows you to turn on the system
through a PCI modem. This feature requires an ATX power supply that provides
at least 1A on the +5VSB lead. Configuration options: [Disabled] [Enabled]
Power On By PS/2 Keyboard [Disabled] Power On By PS/2 Keyboard [Disabled] Power On By PS/2 Keyboard [Disabled] Power On By PS/2 Keyboard [Disabled] Power On By PS/2 Keyboard [Disabled]
Allows you to use specific keys on the keyboard to turn on the system. This
feature requires an ATX power supply that provides at least 1A on the +5VSB
lead. Configuration options: [Disabled] [Space Bar] [Ctrl-Esc] [Power Key]
Automatic Power Up [Disabled] Automatic Power Up [Disabled] Automatic Power Up [Disabled] Automatic Power Up [Disabled] Automatic Power Up [Disabled]
Allows an unattended or automatic system power up. You may configure
your system to power up at a certain time of the day by selecting
[Everyday] or at a certain time and day by selecting [By Date].
Configuration options: [Disabled] [Everyday] [By Date]
The Automatic Power Up feature does not work if the system is powered
down by an operating system, such Windows
® 98, that has an enabled
Advanced Configuration and Power Interface (ACPI) support.