Asus Pundit P2-PE2 - Manual (Page 75)

5 - 2 7 5 - 2 7 5 - 2 7 5 - 2 7 5 - 2 7 A S U S P u n d i t - P E 2 A S U S P u n d i t - P E 2 A S U S P u n d i t - P E 2 A S U S P u n d i t - P E 2 A S U S P u n d i t - P E 2
Other Boot Device Select [INT18 Device (Network)] Other Boot Device Select [INT18 Device (Network)] Other Boot Device Select [INT18 Device (Network)] Other Boot Device Select [INT18 Device (Network)] Other Boot Device Select [INT18 Device (Network)]
Configuration options: [Disabled] [INT18 Device (Network)]
Plug & Play O/S [No] Plug & Play O/S [No] Plug & Play O/S [No] Plug & Play O/S [No] Plug & Play O/S [No]
Allows you to use a Plug-and-Play (PnP) operating system to configure the
PCI bus slots instead of using the BIOS. When [Yes] is selected, interrupts
may be reassigned by the OS. If you installed a non-PnP OS or if you want
to prevent reassigning of interrupt settings, keep the default setting [No].
Configuration options: [No] [Yes]
Boot Virus Detection [Enabled] Boot Virus Detection [Enabled] Boot Virus Detection [Enabled] Boot Virus Detection [Enabled] Boot Virus Detection [Enabled]
Allows you to set boot virus detection, ensuring a virus-free boot sector.
The system halts and displays a warning message when it detects a virus. If
this occurs, you can either allow the operation to continue or use a virus-
free bootable floppy disk to restart and investigate your system.
Configuration options: [Enabled] [Disabled]
Quick Power On Self Test [Enabled] Quick Power On Self Test [Enabled] Quick Power On Self Test [Enabled] Quick Power On Self Test [Enabled] Quick Power On Self Test [Enabled]
Speeds up the Power-On-Self Test (POST) routine by skipping retesting a
second, third, and fourth time. Configuration options: [Enabled] [Disabled]
Full Screen Logo [Enabled] Full Screen Logo [Enabled] Full Screen Logo [Enabled] Full Screen Logo [Enabled] Full Screen Logo [Enabled]
Allows you to enable or disable the full screen logo display feature.
Configuration options: [Disabled] [Enabled]
Set this item to [Enabled] to use the ASUS MyLogo™ feature.
Interrupt Mode [APIC] Interrupt Mode [APIC] Interrupt Mode [APIC] Interrupt Mode [APIC] Interrupt Mode [APIC]
The Advanced Programmable Interrupt Controller (APIC) setting allows you
to distribute interrupt routings more than the 16 IRQs. The Programmable
Interrupt Controller (PIC) setting allows you to use only the 16 IRQs.
Configuration options: [APIC] [PIC]