Extron Electronics MP 101 Series User Guide - Manual (Page 20)

3-2
MP 101 AAP
MP 101 Series • MP 101 AAP
The Extron MP 101 AAP is a high performance microphone to
line level audio preamplifi er. The three models are two-space
MP 101 AAPs in black, white, and RAL 9010 (Eurowhite).
Rear Panel Features
POWER
12V
0.2A MAX
LINE
OUTPUT REMOTE
10V
VOL/MUTE ON OFF ON OFF
PHANTOM
LOW CUT
MIC TO LINE
PREAMPLIFIER
MP 101 AAP
2 1 3 4 5
Power input
a
Power — Plug the external 12 VDC power supply into this
captive screw connector. The power supply is included with the
unit.
T
To verify the polarity before connection, plug in the power
supply with no load and check the output with a voltmeter.
C
When connecting the power supply, voltage polarity
is extremely important. Applying power with
incorrect voltage polarity could damage the power
supply and the interface. Identify the power cord
negative lead by the ridges on the side of the cord.
Power Supply
Output Cord
Captive Screw
Connector
3/16" (5 mm) MAX
SECTION A–A
Ridges
Smooth
A A
N
Do not tin the stripped power supply leads before
installing the captive screw connector. Tinned wires are
not as secure in the captive screw connectors and could
pull out.
W
The two power cord wires must be kept separate while
the power supply is plugged in. Remove power before
continuing.