Extron Electronics MP 101 Series User Guide - Manual (Page 36)

5-4 MP 101 Series • Architectural Installation
Architectural Installation, cont’d
• If the MP 101 AAP or MP 101 D are being installed in
a two- or four-gang AAP plate, attach the wall box to
the wall stud or furniture with nails or screws, leaving
the front edge fl ush with the outer wall or furniture
surface. See the illustration below, which applies to
one-, two-, three-, and four-gang wall boxes.
• If attaching the wall box to wood, use four #8 or #10
screws or 10-penny nails. A minimum of 1/2 inch (1.3
cm) of screw threads must penetrate the wood.
• If attaching the wall box to metal studs or furniture,
use four #8 or #10 self-tapping sheet metal screws or
machine bolts with matching nuts.
Installation Cable
Cable Clamp
Wall Stud
Installation Cable
Cable Clamp
Wall Stud
Screws or Nails Screws or Nails