B&K Precision 2542B-GEN - Manual - Manual (Page 233)

Specifications
233
Amplitude stability ± 2% in 4 hours
Amplitude flatness
When freq.
≤ 5 MHz: ± 5%
When freq. > 5 MHz: ± 10%
Amplitude flatness
(Built-in ARB, User
ARB)
When freq.
≤ 50 kHz: ± 5%
When freq. > 50 kHz: ± 20%
Output impedance 50
Ω
Modulating Waveform Output (Mod Out)
Waveforms All 30 built-in arbitary waveforms
Output Amplitude 5 Vpp ± 20 %
Output Impedance
600 Ω
AM, FM, PWM and DCOM Modulation Characteristics
AM FM DCOM PWM
Carrier
waveforms
Sine, Square Pulse
Modulating
waveforms
All built-in arbitrary waveforms
Modulation
frequency
1 mHz to 1 MHz
Built-in arbitrary waveforms are: Sine, Square, Triangle, Up
ramp, Down ramp, Positive pulse, Negative pulse, Positive double
pulse, Negative double pulse, Positive DC, Negative DC, Full Wave,
Half Wave, Clipped Sine, Gate Sine, SQRT, Exponential, Log,