B&K Precision 2542B-GEN - Manual - Manual (Page 72)

Basic Operation
72
Pulse
Mode
Positive greater than
Positive equal
Positive within
Positive less than
Negative greater than
Negative equal
Negative within
Negative less than
Pulse
Setup
Set the pulse width
More 1/2 ---- Select page 2/2
Note: (For models 2540B-GEN and 2542B-GEN only)
When Source is set to EXT or EXT/5, the EXT
TRG/MOD OUT BNC terminal will function as an
external trigger terminal. When Source is set to
all other options, the same terminal will function
as the modulation waveform output that is part of
the built-in arbitrary waveform generator.
Press trigger control MENU key to display the TRIGGER
menu, press Type softkey to select Pulse trigger and then
press the More 1/2 softkey to display TRIGGER menu page
2/2.