B&K Precision 8500-8526 - Manual - Manual (Page 31)

Examples of the three conditions of operation are illustrated in the following diagram:
Power-on state
The default power-on instrument state is to not remember the instrument mode settings before the
last power-down. If you wish to have the mode settings remembered across a power-down, power-
up cycle, use the following keystrokes:
Key Display
Shift + Menu :CONFIG
Enter :INITIAL CONFIG
▽ :INPUT RECALL
▽ :POWER-ON RECALL
Enter :OFF <DEFAULT>
▽ :ON
Enter :POWER-ON RECALL
Esc :CONFIG
8500 DC Load Series Version: 030614 Page 31 of 77
Steady state
Transient
Dynamic
A
B
Repeat
Time