I-View AnyNet-0401Mini Embedded NVR - Manual (Page 136)

136
black color and “live viewing with recording” with red color.
6. Click to display the IP camera number button.
7. PTZ control buttons. Please refer to Chapter 3-11 for detail information and control.
8. Show eMap, NVR connection information, and NVR connection status.
9. Set up I/O sensor if NC-3213USB or NC-080AZ PTZ camera Receiver module is installed.
10. Right-Click any channel from the spilt screen of the main screen, the user can setup individual
video channel attributes and functions.
Hide video: Blank out the currently selected video
channel from the main screen while any recording
sessions would not be affected.
Announce: The function for talk to the camera site
directly, the detail process please refer to
Chapter4-1.
ePTZ: The function for control the IP camera’s
digital Pan/Tile/Zoom via mouse from the CMS, the
detail process please refer to Chapter4-1.
PTZ: The function for control the Pan/Tile/Zoom of
Analog /IP PTZ camera via mouse from the CMS, the detail process please refer to Chapter4-1.
Duplicate to: Duplicate the video of this selected channel to the monitor 01 or spot monitor 02.
Snapshot: Take a single picture of the selected channel’s live image and save the snapshot picture
in the disk.
Zoom in: Magnify the live images of selected video channel. Once you have zoomed in the video
display, you can navigate throughout the enlarged viewing area by simply dragging the video
images to any direction you wish, while holding your mouse left button.
Zoom out: Zoom out the live images if needed after zoom in.
Clear zoom: Return back to the original view display.
Adjust Image Colors: Adjust the brightness, contrast, saturation, and hue levels for the selected
video channel’s live images.
Default: Bring back to the original settings.