I-View AnyNet-0401Mini Embedded NVR User Manual
Page 94
94
Enable Snapshot: Select camera to snapshot when action is taken.
Enable sound alarm: Select camera for snapshot when action is taken.
Enable notification: Select the types of notification when action is taken.
Shift PTZ position: Set up the PTZ camera shift position when action is taken.
Enable TV out: Set up the camera for TV out when action is taken.
Step 5.
Select the output relays from Relay 01 to 06 in “Controller board” (NC-3213USB) or
select the output relays from each NC-180AZ PTZ receiver module.
Step 6.
Type the recording duration after sensor is triggered from “Post recording” field.
Step 7.
Click “OK” to complete the setting.
The user can go to the path “Windows
Start
Programs
Witness XXXX Pro” and
simply click “Access control –ezFingerkey” for detail management and setup. Please refer
to the fingerprint access controller user‘s manual.