I-View AnyNet-0401Mini Embedded NVR User Manual

Page 138

Advertising
background image

138

10. Click this icon to connect the NVR or Group.

11. Click this icon to exit this section.

12. Move this tool bar to adjust the quality of transmission video.

13. You can choice the access video streaming NVR or IP camera directly. Enable “Video

streaming from IP camera” tab, the remote PC will get the video streaming from IP camera

directly. Also, you can choice the Low/High/ Dual streaming resolution for video transmission.

The best way is to choice the “Dual streaming” for remote viewing, but it will occupy the more

bandwidth, so it just suited for the LAN environment and for the IP camera with supported dual

streaming mode. Disable “Video streaming from IP camera” tab (Default) and get the video

streaming from NVR/NVR, the user does not need to open the port number for the IP camera,

which make it easier to setup the system. There are 2-way for the video transmission protocol;

one is UDP, the other is TCP.

If the remote access via Internet and please select the TCP protocol, .

The tool menu bar

14. This section will be described the parameters for the remote connection as below:

Save Password: Check to save the user’s password when the user connects to local NVR. The

password will automatically be recalled when the user types this same username.

Reconnect: Check to automatically reconnect to the NVR Server if disconnected.
Record: Check to automatically record videos on remote PC) when the NVR server is connected.
Listen: Check to allow the remote user listen to the cameras from NVR Server or IP Camera.
Select camera: Check to select which cameras to connect to NVR/NVR when connected. The

Select cameras” window will pop up before connecting to the NVR/NVR Server.

Full Screen: Check to display the videos with full screen when connected.

15. NVR setup: The user can set up NVR

information, live video connection, event

status, remote control, and e-Map edition

if there are several NVR Servers. After

setup, the user can click the

” icon to select the NVR

Advertising