I-View AnyNet-0401Mini Embedded NVR - Manual (Page 73)

73
e-Map setup: The user can create an e-Map for the location of NVR, cameras, and other devices and
set up the contact information for notification. When the cameras or other devices on the map are
triggered, the triggered devices will show flash on the map at the same time.
You must entry the NVR no for the CMS auto upload or download the eMap information.
Follow the instructions below for eMap setup:
1.)
Click “Information” tab.
2.)
Type the information in “Contact person”, “Phone number” “NVR location” and “Note” column.
This information will be shown on the notification to the remote client PC (CMS)when connecting.
3.)
Click “e-Map edit” tab.
4.)
Click
and browse the map file from NVR folder and click “Update” icon after the user selects
the Map file. (The map file can be a BMP or JPG file.)
Device types