I-View AnyNet-0401Mini Embedded NVR - Manual (Page 47)

47
stamp. Please follow the steps below to set up FTP server notification entries.
Step 1.
Click “FTP notify” tab.
Step 2.
Enter the DNS name and port
number (default is port 21) which
the user wishes to send the
triggered information to this FTP
server.
Step 3.
Entry the “User name” and
“Password” of FTP server for
login.
Step 4.
Enable “ Passive mode” for some
special FTP server. Ask your
MIS staff for the detail setting.
Step 5.
Entry the saving path and check “Attached image file” icon, if you needed.
Step 6.
Click “Save” button to save your pending entry. This entry will be listed at the
bottom section of this window.
Step 7.
Repeat step 2 through 4 to add other phone call notification entries.
Notify by Phone Call: Upon motion
detection, the NVR system can dial the listed
phone number(s) and play a recorded
message or siren. Please follow the steps
below to set up phone call notification entries.
Before setting up for phone call notification,
please refer to “System configuration” for
dial-up voice modem setup first.
Step 8.
Click “Phone call” tab.
Step 9.
Enter the phone number the user
wish to call.