CEMB USA DWA 1000XLB - Manual (Page 11)

I 0645 - 12
1
2
b
3
a a
3 b
GB
3.1 - Home page
The home page appears at the beginning of each alignment procedure.
From this page you can select the car and truck alignment procedure, as well as the measuring mode with 2
or 4 measuring heads. You can also access the Settings or the Customer Databank pages.
The measuring mode with 2 measuring heads allows measuring and adjusting only the toe-in and camber of
the front axle. The measuring mode with 4 measuring heads is faster because you do not have to fi t the rear
measuring heads.
It is recommended that only experts use the mode with 2 measuring heads as it is not guaranteed
that the steering wheel stays straight.
Generally, when the home page is displayed, the preliminary operations on the vehicle are performed.
To prepare for measurement:
Position the vehicle on the turn plates 1.
Mount the wheel clamp and the measuring heads on the vehicle wheels 2.
Turn on the computer 3.
Turn on the measuring heads 4.
Mode with two measuring heads active 1.
Battery icon 2.
Sensor positioning when HYBRID mode is active: 3.
Sensor type CAR a.
Sensor type TRUCK b.
: Switch between the car or the truck procedure
: Switch between the mode with 2 or 4 measuring heads
: Menu
: Settings page
: Customer Databank page
: Goes directly to measurement without selecting the vehicle
CAR PROCEDURE TRUCK PROCEDURE
3 - PREPARING FOR MEASUREMENT