CEMB USA DWA 1000XLB - Manual (Page 35)

I 0645 36 GB
9 - ADJUSTMENT
During adjustment the wheel angles are continuously measured and displayed so that the effect of the
adjustments can immediately be seen.
The main angles are shown both in value
and in graphic form by an indicator on a green and red scale
Adjust the angles until the indicator is in the green zone representing the angles in tolerance, while the red
zone represents the angles out of tolerance.
To make it easier to see from a distance you can enlarge the green and red scale for the various angles by
pressing the key on the measuring head keypad.
The following chapters explain the adjustment procedures and phases.