CEMB USA DWA 1000XLB - Manual (Page 42)

I 0645 43 GB
9.6 - (car, VAS procedure) Adjusting the front toe-in with the vehicle resting on
a support (toe-in curve)
For vehicles for which the VAS procedure is required, when exiting the Rear Adjustment page, a message is
displayed asking you to do some checks on the vehicle.
Check the vehicle conditions 1.
If they do not fall within one of the cases contemplated in the message, press to go directly to
the Front Adjustment page
otherwise press to continue. The following appears:
Lift the vehicle and position the VAS tool underneath the front axle 2.
Move the adapters into "raised" position and position the vehicle on them lowering it slowly 3.