CEMB USA DWA 1000XLB User Manual
Page 22
I 0645
23
GB
Wheelbases and tracks
1.
Manufacturer, model, sub-model or technical name, year of registration of the vehicle (enter in the format 'aaaa -
2.
bbbb'
Angle values. The fi rst 3 columns indicate: Minimum/standard/maximum or standard/upper tolerance/lower tole-
3.
rance depending on what was selected with
. The fourth column indicates the maximum difference between the
right and left wheels. 'ADJ' indicates whether the angle is adjustable (R = adjustable; N = not adjustable)
Rim diameter (inches)
4.
Weights and percentage fuel in the tank
5.
: Selects the parameter to be customised. Using the keyboard enter
the data for the new vehicle you want to customise
: Selects the unit of measure and the format of the data to be entered (for
the angles)
/60 = sexagesimal degrees (e.g. 1°55')
/100 = centesimal degrees (e.g. 1.55°)
min/std/max = data in the format minimum/standard/maximum/difference
between right and left
std/toll+/toll- = data in the format standard/upper tolerance/lower
tolerance/difference between right and left
: Saves the modifi cations (active only when modifying a customised vehicle
created previously).
: Creates a new customised vehicle saving the data entered
: Deletes the customised vehicle (active only when modifying a customised
vehicle created previously).
: Goes back to the Vehicle Specifi cations page selected previously
: Inserts the degree symbol (°) to be used if it is not available on the
computer keyboard