CEMB USA DWA 1000XLB - Manual (Page 46)

I 0645 47 GB
10.1 - Vehicle dimensions
To access this page from the Summary page press and then .
The vehicle dimensions are useful to check the symmetry and identify any damage to the suspension system
or the chassis.
The page displays the thrust angles, axle deviation (set-back), wheelbase and track difference in value and
in schematic form. These angles are displayed in degrees or in millimetres or inches according to the data
available in the databank.
: Printing
10.2 - Maximum steering
To access this page, from the Summary page press and then .
Maximum steering allows checking correct centring of the steering box and all the directional devices con-
nected to it. The maximum steering values are not measured by the instrument but must be physically read
on the graduated scale on the mechanical turn plates.
On this page you can enter the maximum internal and external steering values for the right and left wheels
so that they are shown in the printout
: Selects the box where to enter the respective steering value
... : Enters the steering value read
: Saves and exits