ALLIED Vision Technologies Pearleye P-030 LWIR - Manual (Page 44)

Basic parameters and commands
Pearleye Technical Manual V2.3.0
44
Software version and correction data
information (V)
The command V=1 displays information about the correction data installed in
the non-volatile memory. The current firmware version and also the serial num-
ber of the camera are output.
Current parameter settings (Y)
The command Y=1 shows the actual set parameter values.
GigE feature name (CameraSpecialFeatures) Feature Visibility Description
SensorTemperatureState Expert Camera sensor temperature
state.
0 = The sensor temperature is
OK.
1 = The sensor temperature is
outside the optimum range.
QuerySensorTemperatureState Expert Query camera sensor tempera-
ture state.
( T = 1 command)
ShutterTemperatureValue Beginner Shutter temperature value in
degree Celsius.
QueryShutterTemperatureValue Beginner Query camera shutter tempera-
ture state.
( T = 2 command)
Table 16: GigE feature: Sensor temperature state
Note

This function is not available as GigE Vision feature.
Note

This function is not available as GigE Vision feature.