ALLIED Vision Technologies Pearleye P-030 LWIR - Manual (Page 45)

Basic parameters and commands
Pearleye Technical Manual V2.3.0
45
Show help text (?)
The command ?=1 shows a command reference text at the serial terminal. It
lists a short description for each command available in the firmware.
Note

This function is not available as GigE Vision feature.
Note

The displayed command reference is for both: AVT Goldeye and
AVT Pearleye camera families.
See the command reference to verify, if a command is valid for
your camera model: Chapter
Command reference on page 65.