ALLIED Vision Technologies Pearleye P-030 LWIR - Manual (Page 79)

Appendix
Pearleye Technical Manual V2.3.0
79
ImageSizeControl
AcquisitionControl
Feature Description
SensorWidth Maximum width of the sensor in pixels.
SensorHeight Maximum height of the sensor in pixels.
WidthMax This feature represents the maximum width (in pixels) of the
image after horizontal binning, decimation or any other function
changing the horizontal dimensions of the image.
HeightMax This feature represents the maximum height (in pixels) of the
image after vertical binning, decimation or any other function
changing the vertical dimensions of the image.
Width This feature represents the actual image width expelled by the
camera (in pixels).
Height This feature represents the actual image height expelled by the
camera (in pixels).
OffsetX This feature represents the horizontal offset from the origin to
the AOI (in pixels).
OffsetY This feature represents the vertical offset from the origin to the
AOI (in pixels).
DecimationHorizontal Unused.
DecimationVertical Unused.
PixelFormat List with all available pixel formats of the camera, e.g. MONO12.
TestImageSelector Enables or disables the internal test image generator of the
camera.
Table 37: Camera standard feature: ImageSizeControl
Feature Description
AcquisitionMode This feature controls the acquisition mode of the software. It
describes how many frames should be acquired.
AcquisitionStart Starts the image acquisition of the camera.
AcquisitionStop Stops the image acquisition of the camera.
Table 38: Camera standard feature: AcquisitionControl