Burkert Type 8791 - Manual (Page 18)

18
Installation
5.2.3. Bürkert device dtm
procedure:
→
Start “Setup.exe” in the directory
AdditionalSetups\BuerkertDTMs\SETUP_Positioner_Typen_869X_879X_V1.0.0.
or alternative
→
Start “Setup.exe” in the master directory:
After you have selected the language,
you can choose which components should be installed:
select PACTware 4.1 SP1 and Buerkert DTM Positioner 3-wire.
After you have selected the installation language, the installation is performed.
English
Software Tool - Positioner