Burkert Type 8791 - Manual (Page 24)

24
Operationandfunction
6.3. Basic Settings
The basic settings of the positioner are implemented at the factory.
Once the device DTMs are activated, the basic settings can be adapted user-specifically:
• Define the device identification
• Run the automatic adjustment X.TUNE
• Transfer parameters (see Chapter “6.4. Transferring Parameters”)
• Parameterization of functions (see Chapter “6.5. Parameterization”).
6.3.1. activation of device dtms
The DTM window is used for device identification, defining the basic settings, and parameterization of the device.
The window can be activated as follows:
• Double click on the required DTM in the project window or
• Right click and select "Parameters" or
• With the PACTware "Device / Parameters" menu item.
Navigation area
DTM window Identification area
Work area
Fig. 17: DTM window
English
Software Tool - Positioner