ADC Campus-REX2 RS - Manual (Page 18)

Chapter 1 - Installing and Accessing the REX2
6 Campus-REX2 RS Interface Card User Manual
2 Plug one end of the Category 5 cable into the 10/100Base-T connector on
the Campus-REX2 faceplate.
3 Connect the other end of the Ethernet cable to the local Ethernet
equipment (repeater, PC NIC, or other Ethernet device).
The Campus-REX2 10/100Base-T interface operates in either
half- or full-duplex mode which is determined by autosensing
its network connection. Both the LCD menu and console
menu displays the mode.
120 VA C@60Hz or 220
VA C@50Hz .2A Max
RE X2 Router
Link/A
ctivity
Campus-RS Desktop Unit
10 Base-T
100 Base-Tx port
Category 5 cable
PC, hub, router or
other Ethernet equipment
Ethernet port
MD I-X
MD I
PC
HUB
10 B ase-T 100 B
ase-Tx