Using extended mode – ADC Campus-REX2 RS User Manual

Page 35

Advertising
background image

Chapter 2 - Configuring HDSL Parameters

Campus-REX2 RS Interface Card User Manual

23

Using Extended Mode

With Extended mode, the HDSL link can comprise either one or two loops
with a rate selection in 64 (1 pair) or 128 (2 pair) kbps increments. The
transmission rate between two Campus-RS products is up to 4.608 Mbps with
two pair or 2.304 Mbps with one pair. Both the one loop network or two loop
network operate only in full-duplex transmission.

1

From the HDSL Parameters menu, type

then press

. The

HDSL Operating Mode options changes from Standard to Extended as
shown below.

1

ENTER

Jul 07, 2003

ADC TELECOMMUNICATIONS, CAMPUS RS, Version 5.1 08:19:34

Local Unit ID:

Local I/F:

REX2

Remote Unit ID: Inactive

Remote I/F: Inactive

Circuit ID:

EXTENDED MODE HDSL PARAMETERS

1) HDSL Operating Mode:

Extended

(Standard, Extended)

2) Transceiver Mode:

Auto

(Auto, Master, Slave)

3) HDSL Loop Mode:

2 Loops

(1 Loop, 2 Loops)*

4) HDSL Rate:

256

*Note:

1 Loop

= single loop, full duplex

2 Loops = two loops, full duplex

Enter (S)ave to apply changes !

(S)ave

(R)eturn

(M)ain Menu

ENTER CHOICE>

Advertising