ADC Campus-REX2 RS - Manual (Page 53)

Chapter 3 - Configuring the REX2
Campus-REX2 RS Interface Card User Manual 41
Accessing the Bridge and ARP Tables
The bridge table shows MAC addresses that are dynamically learned by the
Campus-REX2 (see
“Viewing the Bridge Table” on page 41 ). The ARP table
shows the MAC address associated with each IP address with which the
bridge is communicating. The ARP table can be accessed from either the
bridge or router configuration screen (see
“Viewing the ARP Table” on
page 42 ).
Viewing the Bridge Table
The bridge table contains a maximum of 2045 entries. These entries are aged
out of the table in the time frame that you enter when
“Configuring Spanning
Tree Protocol” on page 33 .
1 From the Main Menu ( page 1-14 ), type then press to access
the REX2 Configuration and Status screen. Ensure Bridge is selected.
2 From the REX2 Configuration and Status screen, type then press
. The Bridge Configuration screen is displayed.
3 From the Bridge Configuration screen, type then press . The
Bridge Table is displayed.
2 ENTER
4
ENTER
3 ENTER
BRIDGE TABLE
Total entries: 57
MAC ADDRESS STATUS AGE(sec)
00:00:23:00:12:02 learned 5
00:00:23:00:12:03 learned 5
00:00:23:00:12:01 learned 6
00:00:23:00:12:06 learned 5
00:00:23:00:12:07 learned 5
00:00:23:00:12:04 learned 5
00:00:23:00:12:05 learned 5
00:00:23:00:12:0A learned 5
00:00:23:00:12:0B learned 5
00:00:23:00:12:08 learned 5
00:00:23:00:12:09 learned 5
00:00:23:00:12:0E learned 4
00:00:23:00:12:0F learned 4
00:00:23:00:12:0C learned 4
00:00:23:00:12:0D learned 4
00:00:23:00:12:12 learned 4
(P)revious (N)ext (F)ind (E)ntire table
(U)pdate table (C)lear table
(R)eturn (M)ain Menu
TABLE>