CognitiveTPG A776 - Manual (Page 21)

16 Chapter 3: Settng up the Printer
A776 Two-Color Thermal/Impact Hybrid Printer: User Guide A776 UG00001 B 10/06
Connect the cables
Cable connections are made at the back of the printer.
The cash drawer cable connects the printer to one or two cash drawers.
CAUTION
Be careful to connect the USB cable only to point A (below). Attempts to connect the
USB cable at point B can cause permanent damage to the communications circuitry
Connect the communications cables first, and then plug in the power supply.
Note
If your system has two cash drawers, attach a
Y-cable to the printer’s cash drawer connector as
shown.
�������
�������
����
������
����
������
�����������������
���������������������
Note
Connector panel varies with printer configuration. The 25-pin serial and Ethernet connector versions are not
shown)
The cash drawer cable connects the printer to one or
two cash drawers.
CAUTION
Be careful to connect correct cable into printer only at
the cash drawer connector (B).
Plug the cable into the cash drawer connector
(standard phone jack) located at the rear of the printer.
Cash drawer cables
Strain
Relief
DIP
switches
9-pin RS-232C
communication
connector
CAUTION:
DO NOT plug the
USB cable here
Cash drawer
connector
USB
connector
Power
supply
connector