CognitiveTPG A776 - Manual (Page 37)

32
A776 Two-Color Thermal/Impact Hybrid Printer: User Guide A776 UG00001 B 10/06
Chapter 4: Using the Printer
Inserting checks or cards for imaging (scanning)
Place the checks or cards or other media on the top slip table as shown in the figure below for imaging only.
Slide the media straight forward into the feed rolls.
Note
The MICR line of a check cannot be read by the MICR reader in this position.
1 2
Front Cover
Lower Slip table
Top Slip table
Cards
Inserting checks for imaging and check verification
If the MICR line of a check must be verified (read) before signing, then the check must be inserted at the lower
slip table.
Note
Cards or thick media cannot be inserted at the lower slip table. Slide the media forward and to the right until the
green slip-in light comes on. Then, hold the media to the right and release it as soon as the printer begins to run.
1 2
Front Cover
Lower Slip table